3Com MSR 50, MSR 30 Vi-card busy-tone-detect, Undo vi-card busy-tone-detect custom index, 2617

2617

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program [Sysname-voice-dial] entity 10 pots [Sysname-voice-dial-entity10] vad-on

vi-card busy-tone-detect

Syntax vi-cardbusy-tone-detect{ auto index line-number custom area-number index argu f1 f2 p1 p2 p3 p4 p5 p6 p7 }

undo vi-card busy-tone-detect custom index

View Voice view

Parameter index: Index of busy tone type, in the range of 0 to 3.

line-number: Voice subscriber line number. The value range varies with the inserted cards.

area-number: Area number. Currently, it is set to 2.

argu: Reserved, in the range of 0 to 32,767.

f1: Frequency 1 in Hz, in the range of 50 to 3,600.

f2: Frequency 2 in Hz, in the range of 50 to 3,600.

p1: Signal amplitude 1, in the range of 50 to 32,767.

p2: Signal amplitude 2, in the range of 50 to 32,767.

p3: Duration of a single tone in milliseconds, in the range of 10 to 1,000.

p4: Duration error of a single tone in milliseconds, in the range of 0 to 500.

p5: Duration of silence in milliseconds, in the range of 10 to 1,000.

p6: Duration error of silence in milliseconds, in the range of 0 to 500.

p7: Absolute difference between p3 and p5 in milliseconds, in the range of 0 to 500

Description Use the vi-cardbusy-tone-detectcommand to configure the parameters for the busy tone detection on the FXO interface.

Use the undo vi-cardbusy-tone-detectcommand to restore the default settings.

This command applies to the FXO interface only.

The system supports four types of busy tones, which are specified by the index argument.