3Com MSR 50, MSR 30 manual Remote address, Undo remote address, 523

523

Parameter seconds: Period of negotiation timeout in seconds. In PPP negotiation, if the local device fails to receive a response from the peer during this period of time, PPP will resend the last packet. This period ranges from 1 to 10 seconds.

Description Use the ppp timer negotiate command to set the PPP negotiation timeout interval.

Use the undo ppp timer negotiate command to restore the default value.

By default, the PPP negotiation timeout interval is three seconds.

Example # Set the PPP negotiation timeout interval to five seconds.

<Sysname> system-view

[Sysname] interface serial 1/0

[Sysname-Serial1/0] ppp timer negotiate 5

remote address

Syntax remote address { ip-address pool [ pool-number ] }

undo remote address

View Interface view

Parameter ip-address: Indicates the IP address assigned to the peer.

pool [ pool-number]: Specifies an address pool identified by the pool-numberargument. An IP address from this address pool will be assigned to the peer. The pool-numberargument ranges from 0 to 99 and defaults to 0.

Description Use the remote address command to allocate IP address for the peer device.

Use undo remote address to remove the IP address allocated for the peer device.

By default, an interface does not allocate IP address for the peer device. If the pool-number argument is not specified while using this command, the global address pool 0 will be used by default.

This command can be used in situation when the local device is configured with an IP address, while the peer has no IP address. To accomplish the configuration, you need to configure the ip address ppp-negotiatecommand on the peer device, and configure the remote address command on the local device, so that the peer device can accept IP address allocated to it through PPP negotiation.

c CAUTION: This command allows the peer device to configure its IP address by itself even if it has received an IP address allocated by the local device. If you do not want this to happen, you must configure the ppp ipcp remote-address forced command to forbid the peer device to configure its own IP address.

Related command: ip address ppp-negotiate,ppp ipcp remote-address forced