3Com MSR 50, MSR 30 manual Display pim claimed-route, 1393

1393

Candidate RP: 12.12.12.9(LoopBack1)

Priority: 0

HoldTime: 150

Advertisement Interval: 60

Next advertisement scheduled at: 00:00:48

Candidate RP: 3.3.3.3(Ethernet1/0)

Priority: 20

HoldTime: 90

Advertisement Interval: 50

Next advertisement scheduled at: 00:00:28

Candidate RP: 5.5.5.5(Ethernet1/1)

Priority: 0

HoldTime: 80

Advertisement Interval: 60

Next advertisement scheduled at: 00:00:48

Table 335 Description on the fields of the display pim bsr-info command

Field	Description
Elected BSR Address	Address of the elected BSR
Candidate BSR Address	Address of the candidate BSR
Priority	BSR priority
Hash mask length	Hash mask length for RP selection calculation
State	BSR state
Scope	Scope of the BSR
Uptime	Length of time for which this BSR has been up, in
	hours:minutes:seconds
Next BSR message scheduled	Length of time in which the BSR will expire, in
at	hours:minutes:seconds
Candidate RP	Address of the C-RP
Priority	Priority of the C-RP
HoldTime	Timeout time of the C-RP
Advertisement Interval	Interval at which the C-RP sends advertisement messages
Next advertisement scheduled	Length of time in which the C-RP will send the next
at	advertisement message, in hours:minutes:seconds

display pim claimed-route

Syntax display pim [ vpn-instancevpn-instance-name all-instance] claimed-route[ source-address ]

View Any view

Parameter vpn-instance-name: VPN instance name, a case sensitive string of up to 31 characters.

all-instance: Specifies all VPN instances.

source-address: Displays the information of the unicast route to a particular multicast source. If you do not provide this argument, this command will display the information about all unicast routes used by PIM.