3Com MSR 50, MSR 30 manual Hdlc Configuration Commands, Link-protocol hdlc, Timer hold seconds

25

HDLC CONFIGURATION COMMANDS

link-protocol hdlc

Syntax	link-protocol hdlc
View	Interface view
Parameter	None
Description	Use the link-protocol hdlc command to configure HDLC encapsulation on the
	interface.
	As a data link layer protocol, HDLC can carry network layer protocols, such as IP
	and IPX.
	By default, PPP encapsulation is configured on an interface.
Related command:	timer hold
Example	# Configure HDLC encapsulation on interface Serial 2/0.
	<Sysname> system-view
	[Sysname] interface serial 2/0
	[Sysname-Serial2/0] link-protocol hdlc

timer hold

Syntax	timer hold seconds
	undo timer hold
View	Interface view
Parameter	seconds: Link status polling interval (in seconds), in the range 0 to 32767.
Description	Use the timer hold command to set the polling interval.
	Use the undo timer hold command to restore the default.
	By default, the link status polling interval is 10 seconds on the interface.