3Com MSR 30, MSR 50 delete hop, display explicit-path

1566 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS
<Sysname> system-view
[Sysname] explicit-path path1
[Sysname-explicit-path-path1] add hop 3.3.29.3 exclude after 3.3.10.5
delete hop
Syntax delete hop ip-address
View Explicit path view
Parameter ip-address: IP address of a node along the explicit path.
Description Use the delete hop command to remove a specified node from the explicit path.
Example # Remove the node identified by 10.0.0.1 from the explicit path PL.
<Sysname> system-view
[Sysname] explicit-path path1
[Sysname-explicit-path-path1] delete hop 10.0.0.1
display explicit-path
Syntax display explicit-path [ pathname ]
View Any view
Parameter pathname: Specifies a path name, a string of 1 to 31 characters.
Description Use the display explicit-path command to display information about an explicit
path.
If no path name is specified, information about all explicit paths is displayed.
Example # Display information about all explicit paths.
<Sysname> display explicit-path
Path Name : ErHop-Path1 Path Status : Enabled
1 1.1.1.10 Strict Include
2 2.1.1.10 Strict Include
3 1.1.1.20 Strict Include
4 2.1.1.20 Strict Include
5 2.1.1.30 Strict Include
6 1.1.1.30 Strict Include
7 9.4.4.4 Strict Include
Path Name : ErHop-Path2 Path Status : Enabled
1 1.1.1.10 Strict Include
2 2.1.1.10 Strict Include
3 1.1.1.40 Strict Include
4 2.1.1.40 Strict Include
5 1.1.1.50 Strict Include
6 2.1.1.40 Strict Include