3Com MSR 30, MSR 50 manual Display isis route, Up state and direct interface’s IP address, Pri

1050 CHAPTER 74: IS-IS CONFIGURATION COMMANDS

View	Any view
Parameters	verbose: When this parameter is used, the area address advertised in a neighbor’s
	Hello packet will be displayed. Otherwise the system displays only the summary
	information.
	process-id: Specifies an IS-IS process ID, in the range of 1 to 65535.
	vpn-instance-name: Specifies a VPN instance name, in the range of 1 to 31
	characters.
Description	Use the display isis peer command to display IS-IS neighbor information.
	Besides all the information displayed using the display isis peer command, the
	display isis peer verbose command displays neighbor area address, hold time of
	Up state and direct interface’s IP address.
Examples	# Display detailed IS-IS neighbor information.
	<Sysname> display isis peer verbose
		Peer information for ISIS(1)
		----------------------------
	System Id: 0000.0000.0003
	Interface: Ethernet1/0	Circuit Id: 0000.0000.0003.01
	State: Up HoldTime: 8s	Type: L1(L1L2)	PRI: 64
	Area Address(es):10
	Peer IP Address(es): 192.168.0.3
	Uptime: 00:14:03
	Adj Protocol: IPV4
	Table 239 Description on the fields of the display isis peer command
	Field	Description
	System Id	System ID
	Interface	Interface connecting to the neighbor
	Circuit Id	Circuit ID
	State	State
	HoldTime	Holdtime
	Type	Type of the neighbor
	PRI	DIS Priority
	Area Address(es)	The neighbor’s area address
	Peer IP Address(es)	Interface IP address of the neighbor
	Uptime	Time being up
	Adj Protocol	Adjacency protocol

display isis route

Syntax display isis route [ ipv4 ] [ [ level-1level-2] verbose ] * [ process-id vpn-instancevpn-instance-name ]

View Any view