3Com MSR 50 Mpls ldp transport-address, Mpls lsr-id, Syntax mpls lsr-id lsr-id Undo mpls lsr-id

1553

# Set the targeted Keepalive timer for remote sessions to 1,000 seconds.

<Sysname> System-view

[Sysname] mpls ldp remote-peer BJI [Sysname-mpls-ldp-remote-bji] remote-ip 3.3.3.3

[Sysname-mpls-ldp-remote-bji] mpls ldp timer keepalive-hold 1000

mpls ldp transport-address

Syntax mpls ldp transport-address { interface-typeinterface-number interface }

undo mpls ldp transport-address

View Interface view/MPLS LDP remote peer view

Parameter interface-typeinterface-number: Specifies an interface by its type and number, making LDP use the address of this interface as the TCP transport address.

interface: Specifies that LDP use the IP address of the current interface as the TCP transport address. This keyword is available only in interface view.

Description Use the mpls ldp transport-addresscommand to configure the LDP transport addresses.

Use the undo mpls ldp transport-addresscommand to restore the defaults.

By default, the transport addresses are both the MPLS LSR ID.

In interface view, you configure the link Hello transport address; in MPLS LDP remote peer view, you configure the targeted Hello transport address.

Example # On interface Ethernet 1/0, configure the link Hello transport address for local sessions as the IP address of the current interface.

<Sysname> System-view

[Sysname] interface ethernet 1/0 [Sysname-Ethernet1/0] mpls

[Sysname-Ethernet1/0] mpls ldp

[Sysname-Ethernet1/0] mpls ldp transport-address interface

#Configure the targeted Hello transport address for remote sessions to be the IP address of interface Ethernet 1/0.

[Sysname] mpls ldp remote-peer bji [Sysname-mpls-ldp-remote-bji] remote-ip 3.3.3.3

[Sysname-mpls-ldp-remote-bji] mpls ldp transport-address ethernet 1/0

mpls lsr-id

Syntax mpls lsr-id lsr-id

undo mpls lsr-id