Dispenser Features

Control Features NOTE: These directions pertain to 5-button and 3-button controls only. If your unit has LCD controls, please refer to the information booklet located in your literature packet.

Ice Dispenser Operation

To dispense ice:

•Select Cubed or Crushed ice mode by pushing button on dispenser control panel. A green indicator light above button shows mode selection.

• Press container against dispenser pad. When dispensing crushed ice, hold container as close to chute as possible to reduce spraying. Selection mode may not be changed while ice dispenser is in operation.

NOTE: If dispenser is active for more than 3 minutes, an automatic lock out sensor will shut down power to dispenser area. See Automatic Lock Out for further information.

Dispenser Lock (some models)

This feature prevents ice or water from being dispensed.

To lock and unlock dispenser:

•To lock dispenser, press and hold Dispenser Lock button for 3 seconds. A green indicator light above button confirms dispenser is locked.

•To unlock dispenser, hold Dispenser Lock button for 3 seconds. Green indicator light above button will go out.

Filter Status Indicator Light (some models)

The Filter Status Indicator Light serves as a reminder to replace the water filter. A green light indicates that the filter is in good condition. A red light indicates the filter should be changed. Once light turns red, it will remain red until function is reset.

To reset indicator:

•Press and hold both Dispenser Lock and Water buttons simultaneously for 4 seconds. The green Filter Status Indicator Light will flash 3 times when the function has successfully reset.

What is the Automatic Lock Out feature?

The Automatic Lock Out feature shuts down power to the water and ice dispenser when either dispenser has run continuously for approximately 3 minutes. If this mode goes into effect, the green light will activate above the Dispenser Lock button.

To unlock dispenser:

•To unlock dispenser, hold Dispenser Lock button for 3 seconds. Green indicator light above button will go out.

Auto Light (some models)

The Auto Light function offers the ability to activate the dispenser light at half-power when the Light Sensor detects that the light levels in room are low.

To activate and deactivate Auto Light:

•To activate, press Auto Light button located on control panel. A green indicator light above button displays to show that sensor is active.

•To deactivate, press Auto Light button. Green indicator light will go out.

NOTE: Dispenser light will operate whether or not Auto Light is selected.

Sabbath Mode

This mode is intended to deactivate power to the LED and dispenser lights, while allowing the controls to remain operational.

To activate Sabbath Mode:

•Press and hold both Dispenser Lock and Auto Light buttons simultaneously for 3 to 4 seconds. After 3 to 4 seconds, the LED and dispenser lights will turn off. Dispenser light will not activate during dispensing while in this mode.

To deactivate Sabbath Mode:

•Press and hold both Dispenser Lock and Auto Light buttons simultaneously for 3 to 4 the LED and dispenser lights will activate.

+

NOTE: In the event that power is interrupted while the Sabbath Mode is active, the control will remain in Sabbath Mode when power returns.

seconds. After 3 to 4 seconds,

15

Page 14 Page 16
Page 15
Image 15
Amana DRS2663BW, DRSE663BC Ice Dispenser Operation, Dispenser Lock some models, Filter Status Indicator Light some models
Page 14 Page 16

DRS2462BW, DRS246RBC, DRS2462BB, DRS2462BC, DRS246RBB specifications

The Amana DRSE663BC, DRSE663BW, DRS2663BB, DRS2663BW, and DRS246RBW are part of Amana's innovative line of dryer models, embodying the brand’s commitment to efficiency, performance, and user-friendly features. Each model has been thoughtfully designed to meet the varying needs of households while providing excellent drying results and convenience.

One of the main features across these models is the use of advanced drying technologies. The dryers incorporate Energy Star certifications, ensuring they are energy-efficient, which translates to savings on utility bills without sacrificing drying performance. The dryers use moisture sensing technology to monitor the humidity levels in the drum during cycles, adjusting the drying time automatically. This ensures that laundry is not only dried efficiently but also prevents over-drying, which can lead to shrinking and fabric damage.

The Amana DRSE663BC and DRSE663BW feature a large capacity, making them suitable for families with higher laundry demands. These models come with a variety of drying cycle options, including heavy-duty, delicates, and quick-dry options, allowing users to choose the perfect setting for each load. The intuitive control panel makes it easy for anyone to customize drying cycles and settings, enhancing the user experience.

Similar features can be found in the DRS2663BB and DRS2663BW models, which also come equipped with a user-friendly interface and adjustable drying times. Their robust build quality stands out, ensuring durability over time. For those concerned about lint buildup, these dryers come with a removable lint screen, making maintenance a breeze and ensuring optimal performance.

The DRS246RBW model emphasizes compactness without sacrificing capability. This appliance is ideal for smaller spaces while still providing ample drying capacity. With the same moisture sensing technology and multiple drying options, it appeals to users looking for space-saving solutions.

All these models feature a sleek design that can blend seamlessly into any laundry space. With a focus on ease of use, durability, and energy efficiency, the Amana DRSE663BC, DRSE663BW, DRS2663BB, DRS2663BW, and DRS246RBW are excellent choices for consumers seeking reliable, high-performance dryers. Whether your laundry needs are vast or compact, Amana has tailored solutions to fit your requirements, emphasizing both functionality and style.
Top Page Image Contents