3Com MSR 30 manual Mfr retry, Mfr stateup-respond-addlink, Syntax mfr retry number Undo mfr retry

404CHAPTER 22: FRAME RELAY CONFIGURATION COMMANDS

Example # Set the bundle LID of the multilink frame relay bundle link Serial 2/0 to be bl1.

<Sysname> system-view

[Sysname] interface serial 2/0

[Sysname-Serial2/0] mfr link-name bl1

mfr retry

Syntax mfr retry number

undo mfr retry

View Frame relay interface view

Parameter number: The maximum times that a bundle link can resend hello messages, in the range 1 to 5.

Description Use the mfr retry command to set the maximum times that a frame relay bundle link can resend hello message when waiting for a hello acknowledgement message.

Use the undo mfr retry command to restore the default.

By default, the maximum times that a frame relay bundle link can resend hello message is twice.

The bundle link sustains link status by periodically sending hello message to the peer end. If the times that a bundle link resends hello message reach the maximum without receiving acknowledgement from the peer, the system will regard the link protocol on the bundle link to be malfunctioning.

Only after the link-protocol fr mfr command is used to associate a frame relay bundle link interface with a frame relay bundle, can this command be configured.

Example # Set the bundle link Serial 2/0 to resend hello message for 3 times at most.

<Sysname> system-view

[Sysname] interface serial 2/0

[Sysname-Serial2/0] mfr retry 3

mfr stateup-respond-addlink

Syntax mfr stateup-respond-addlink

undo mfr stateup-respond-addlink

View System view

Parameter None