1146 CHAPTER 76: OSPF CONFIGURATION COMMANDS

<Sysname> system-view

[Sysname] interface serial2/0

[Sysname-Serial2/0] ospf cost 65

ospf dr-priority

Syntax ospf dr-priority priority

undo ospf dr-priority

View Interface view

Parameters priority: DR Priority of the interface, in the range 0 to 255.

Description Use the ospf dr-prioritycommand to set the priority for DR/BDR election on an interface.

Use the undo ospf dr-prioritycommand to restore the default value.

By default, the priority is 1.

The bigger the value is, the higher the priority.

This configuration is not supported on the NULL interface.

Examples # Set the DR priority on the current interface to 8.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] ospf dr-priority 8

ospf mib-binding

Syntax ospf mib-binding process-id

undo ospf mib-binding

View System view

Parameters process-id: OSPF process ID, in the range 1 to 65535.

Description Use the ospf mib-bindingcommand to bind an OSPF process to MIB operation. Use the undo ospf mib-bindingcommand to restore the default.

By default, MIB operation is bound to the first enabled OSPF process.

Examples # Bind OSPF process 100 to MIB operation.

Page 1146
Image 1146
3Com MSR 30, MSR 50 manual Ospf dr-priority, Ospf mib-binding, Syntax ospf dr-priority priority Undo ospf dr-priority