3Com MSR 50, MSR 30 manual Common Configuration Commands, Display time-range, Time-range

COMMON CONFIGURATION

137 COMMANDS

display time-range

Syntax display time-range { time-nameall }

View Any view

Parameter time-name: Time range name comprising 1 to 32 characters. It is case insensitive and must start with an English letter. To avoid confusion, this name cannot be all.

all: All existing time ranges.

Description Use the display time-rangecommand to display the configuration and state of a specified or all time ranges.

A time range is active if the system time falls into its range, and if otherwise, inactive.

Example # Display the configuration and state of time range trname.

[Sysname] display time-range trname

Current time is 10:45:15 4/14/2005 Thursday

Time-range : trname ( Inactive )

from 08:00 12/1/2005 to 23:59 12/31/2100

Table 544 Description on the fields of the display time-range command

Field	Description
Current time	Current system time
Time-range	The configuration and state of time range, such as time range name, its
	activated state, and start time and ending time.

time-range

Syntax time-rangetime-name { start-time to end-time days [ from time1 date1 ] [ to time2 date2 ] from time1 date1 [ to time2 date2 ] to time2 date2 }

undo time-rangetime-name [ start-time to end-time days [ from time1 date1 ] [ to time2 date2 ] from time1 date1 [ to time2 date2 ] to time2 date2 ]

View System view