Kyocera KM-P4845w, KM-P4850w 1, 2, 3 4, 2, 4

CHAPTER 3 GETTING READY FOR PRINTING

3-2

●Connecting the Printer to Your Network

Perform this procedure in order to connect the printer to the network

hub.

1Turn the main switch on the printer OFF ( ).

CAUTION

Make sure the main switch is OFF ( ) before connecting the

network cable.

2Plug the network cable into the Network Interface Connector

which is located on the left side of the printer.

3Plug the other end of the network cable into the network hub.

4Turn the main switch on the printer back ON ( | ).

(2) Procedures ●Network Settings [Configuring the IP Address, etc.]

Perform this procedure in order to register the required network

settings.

NOTE

•The IP address to be used for the printer will differ depending upon

your network. Confirm the address that you need to use in advance

with your network manager.

•If you will use a DHCP server to designate the IP address, there is

no need to perform the following procedure because the factory

default for the printer is set for DHCP server configuration.

•The “*” in a list of setting options indicates the current setting.

1Press the */Menu key.

2Press the N or M key to select “3. Set/manager”.

Inch specifications

Menu:

3.Set/manager

Metric specifications

Menu:

3.Set/manager

3Press the Enter key.

4Use the MNOP cursor keys to input the pin code (the

default setting is qQrR).

Inch specifications

Enter pin code.

_ _ _ _

Metric specifications

Enter pin code.

_ _ _ _

NOTE

The pin code may be changed (see “13. Mgr. code change” on page

5-10).

Contents

Main NOTE Symbols i Trademark Information About This Operation Guide ii Reading the Functions Edition (On-Line Manual) for This Machine Page iv Options Page CAUTION LABELS 1-1 CHAPTER 1 IMPORTANT! PLEASE READ FIRST. NOTE: DO NOT remove these labels. 1-2 Power supply/Grounding the printer Handling of plastic bags INSTALLATION PRECAUTIONS PRECAUTIONS FOR USE 1-3 Cautions when using the printer 1-4 PRECAUTIONS FOR USE Cautions when handling consumables CHAPTER 2 PRIOR TO SET-UP 1. Names of Parts Page Page Page CHAPTER 2 PRIOR TO SET-UP 2-5 2. Included Software 3. Required Items CHAPTER 2 PRIOR TO SET-UP 2-6 4. Energy Saver Function 5. Auto Shutoff Function 3-1 CHAPTER 3 GETTING READY FOR PRINTING 1. Setup (1) System Configuration Printing from Windows Printing from Macintosh 3-2 1 2 3 4 2 4 5 7 12 8 9 10 11 14 15 16 17 18 1 Page 3-6 2. Paper (1) Paper Type Compatible paper Unacceptable paper Automatic paper width detection 1 2 3 4 5 6 7 8 9 10 4 1/2" [10mm] 1 2 3 Page 4-1 CHAPTER 4 PRINTER OPERATION 1. Basic printing 1 2 3 1 2 3 4 4-3 1 2 3 4 5 7 4. Canceling Printing Page Page 5-1 CHAPTER 5 MANAGEMENT AND SETTING 1. Machine Default (1) List of Machine Settings 5-2 Settings accessible by manager 5-3 5-4 2 3 4 5 6 7 2 4 5 7 8 1 3 6 4 5 7 8 1 5-7 3 1 5-8 3 4 5 6 7 8 5-9 1 5-10 1 5-11 2. Printer Settings 5-12 3. Language Switching 2 4 5 6-1 CHAPTER 6 TROUBLESHOOTING 1. If One of These Messages is Displayed... Message Remedy 6-2 Message Remedy 6-3 Ready to print. Add toner. 1 2 2. Replenishing the Toner 3 4 Page 6-5 3. Replacing the Waste Toner Tank 1 2 3 4 6-6 1 2 3 4 6-7 1 2 1 High voltage is present in the charger section. Take a danger of electrical shock. Page 6-9 7 8 a danger of electrical shock. 1 2 3 Page 6-11 6. Troubleshooting 6-12 6-13 Page 7-1 CHAPTER 7 SPECIFICATIONS <Hardware> CHAPTER 7 SPECIFICATIONS 7-2 <Software Operating Environment> Printer drivers CHAPTER 7 SPECIFICATIONS 7-3 Print Utility (recommended operating environment) Page WARNING Page Page KYOCERA MITA AMERICA, INC. KYOCERA MITA CANADA, LTD. KYOCERA MITA MEXICO, S.A. DE C.V.