CHAPTER 6 TROUBLESHOOTING

6-9

7Close the ejection cover.
8Close the printer securely.
2 If Paper misfeed. Remove paper. appears:
Inch specifications
Paper misfeed.
Remove paper.
Metric specifications
Paper misfeed.
Remove paper.
Paper has jammed in the bypass slot. Perform the following
procedure to remove the jammed paper.
1Pull out the paper jammed in the bypass slot.
* If the jammed paper is difficult to remove, do not pull too
hard but simply proceed to the next step.
2Grasp the printer body release lever and pull it toward you.
The printer body will be opened.
3If the paper is present, remove it from inside the printer.
4Close the printer securely.
3 If Paper misfeed. Open front cover appears:
Inch specifications
Paper misfeed.
Open front cover
Metric specifications
Paper misfeed.
Open front cover
The paper roll has jammed in the indicated paper source. Perform the
following procedure to remove the jammed paper.
1Open the front cover.
WARNING

High voltage is present in the charger section. Take

sufficient care when working in this area, as there is

a danger of electrical shock.