3Com MSR 30, MSR 50 Display ripng, Related commands import-route, Syntax display ripng process-id

1310 CHAPTER 85: IPV6 RIPNG CONFIGURATION COMMANDS

By default, the default metric of redistributed routes is 0.

The specified default metric applies to routes redistributed by the import-routecommand that has no metric specified.

Related commands: import-route.

Examples # Set the default metric of redistributed routes to 2.

<Sysname> system-view

[Sysname] ripng 100

[Sysname-ripng-100] default cost 2

display ripng

Syntax display ripng [ process-id]

View Any view

Parameters process-id: RIPng process number, in the range of 1 to 65535.

Description Use the display ripng command to display the running status and configuration information of a RIPng process. If process-idis not specified, information of all RIPng processes will be displayed.

Examples # Display the running status and configuration information of all configured RIPng processes.

<Sysname> display ripng
RIPng process : 1
Preference : 100
Checkzero : Enabled
Default Cost : 0
Maximum number of balanced paths : 3
Update time :	30 sec(s)	Timeout time	:	180 sec(s)
Suppress time	: 120 sec(s) Garbage-Collect time :			120 sec(s)
Number of periodic updates sent : 0
Number of trigger updates sent : 0
Table 316 Description on the fields of the display ripng command
Field		Description
RIPng Process		RIPng process number
Preference		RIPng route priority
Checkzero		Whether zero field check for RIPng packet
		headers is enabled
Default Cost		Default metric of redistributed routes
Maximum number of balanced paths		Maximum number of load balanced routes
Update time		RIPng updating interval, in seconds
Timeout time		RIPng timeout interval, in seconds
Suppress time		RIPng suppress interval, in seconds
Garbage-Collect time		RIPng garbage collection interval, in seconds