3Com MSR 50 manual Vam client name and client enable, By default, no VAM client is configured

1737

View	System view
Parameter	all: Specifies all configured VAM clients.
	name client-name: Specifies an existing VAM client. The client-nameargument
	indicates the name of the VAM client and is a case-insensitive string of 1 to 31
	characters. Valid characters are A to Z, a to z, 0 to 9, and “.”.
Description	Use the vam client enable command to enable all VAM clients or a specified
	VAM client.
	Use the undo vam client enable command to disable all VAM clients or a
	specified VAM client.
	By default, all VAM clients are disabled.
Related command:	vam client name and client enable.
Example	# Enable the VAM client named spoke.
	<Sysname> system-view
	[Sysname] vam client enable name spoke

vam client name

Syntax	vam client name client-name
	undo vam client name client-name
View	System view
Parameter	client-name: Name of a VAM client, a string of 1 to 31 case-insensitive characters.
	Valid characters are A through Z, a through z, 0 through 9, hyphen (-), and dot (.).
Description	Use the vam client command to create a VAM client and enter VAM client view,
	or enter VAM client view directly if the VAM client already exists.
	Use the undo vam client command to delete the specified VAM client.
	By default, no VAM client is configured.
	Note that you are unable to directly delete a VAM client that is already applied on
	an interface.
Example	# Create a VAM client named abc.
	<Sysname> system-view
	[Sysname] vam client name abc
	[Sysname-vam-client-name-abc]