3Com MSR 30, MSR 50 manual Peer ebgp-max-hop IPv6 address family view

1248 CHAPTER 82: IPV6 BGP CONFIGURATION COMMANDS

ipv6-address: IPv6 address of a peer.

description-text: Description information for the peer/peer group, a string of 1 to 79 characters.

Description Use the peer description command to configure the description information for a peer/peer group.

Use the undo peer description command to remove the description information of a peer/peer group.

By default, no description information is configured for a peer (group).

You need create a peer/peer group before configuring a description for it.

Examples # Configure the description for the peer group test as ISP1.

<Sysname] system-view [Sysname] bgp 100 [Sysname-bgp] ipv6-family

[Sysname-bgp-af-ipv6] group test external

[Sysname-bgp-af-ipv6] peer test description ISP1

peer ebgp-max-hop (IPv6 address family view)

Syntax peer { ipv6-group-name ipv6-address } ebgp-max-hop[ hop-count ] undo peer { ipv6-group-name ipv6-address } ebgp-max-hop

View IPv6 address family view

Parameters ipv6-group-name: Name of a peer group, a string of 1 to 47 characters. ipv6-address: IPv6 address of a peer.

hop-count: Maximum hop count, in the range 1 to 255. By default, the value is 64.

Description Use the peer ebgp-max-hopcommand to allow establishing the EBGP connection to a peer/peer group indirectly connected.

Use the undo peer ebgp-max-hopcommand to remove the configuration.

By default, this feature is disabled.

You can use the argument hop-countto specify the maximum router hops of the

EBGP connection.

Examples # Allow establishing the EBGP connection with the peer group test on an indirectly connected network.