3Com MSR 50 Display fib ip-address, Display fib statistics, Syntax display fib statistics, 789

789

U:Useable	G:Gateway	H:Host	B:Blackhole	D:Dynamic	S:Static
R:Reject	L:Generated by ARP or		ESIS
Destination/Mask Nexthop		Flag	TimeStamp	Interface	Token
10.2.0.0/16	10.2.1.1	U	t[1150900568]	Eth1/0	invalid

display fib ip-address

Syntax display fib ip-address1 [ { mask1 mask-length1 } [ ip-address2 { mask2 mask-length2 } longer ] longer ]

View Any view

Parameter ip-address1,ip-address2: Destination IP address, in dotted decimal notation. ip-address1and ip-address2together determine an address range for the FIB entries to be displayed.

mask1, mask2: IP address mask.

mask-length1,mask-length2: Length of IP address mask.

longer: Displays FIB entries that match the specified address/mask and have masks longer than or equal to the mask that a user enters. If no masks are specified, FIB entries that match the natural network address and have the masks longer than or equal to the natural mask will be displayed.

Description Use the display fib ip-addresscommand to display FIB entries that match the specified destination IP address.

Example # Display the FIB entries that match the natural network of 10.1.0.0 and have the masks longer than or equal to the natural mask.

<Sysname> display fib 10.1.0.0 longer Route Entry Count: 2

Flag:
U:Useable	G:Gateway	H:Host		B:Blackhole	D:Dynamic		S:Static
R:Reject	L:Generated by ARP or ESIS
Destination/Mask Nexthop			Flag	TimeStamp		Interface		Token
10.0.0.0/8	10.1.1.1		U	t[1141140133]		Eth1/0		invalid
10.1.1.1/32	127.0.0.1		HU	t[1141140133]		InLoop0		invalid

For description about the above output, refer to Table 156.

display fib statistics

Syntax display fib statistics

View Any view

Parameter None