3Com MSR 50, MSR 30 manual # Display detailed information about Mpls TE tunnels, 1595, Lsp-Id

1595

incoming-interface: Displays all tunnels that use the interface identified by the interface-typeinterface-numberarguments as the incoming interface.

outgoing-interface: Displays all tunnels that use the interface identified by the interface-typeinterface-numberarguments as the outgoing interface.

interface: Displays all tunnels that use the interface identified by the interface-typeinterface-numberarguments as the incoming or outgoing interface.

interface-typeinterface-number: Specifies an interface by its type and number.

verbose: Displays detailed information.

Description Use the display mpls te tunnel command to display information about MPLS TE tunnels.

Example # Display information about MPLS TE tunnels. (The output may vary by signaling protocol.)

<Sysname> display mpls te tunnel
LSP-Id	Destination	In/Out-If	Name
1.1.1.9:1024	3.3.3.9	-/Eth1/0	Tunnel0
1.1.1.9:2048	3.3.3.9	-/Eth1/1	Tunnel0
Table 413 Description on the fields of the display mpls te tunnel command
Field	Description
LSP-ID	LSP ID of tunnel
Destination	Destination router ID
In/Out-IF	Incoming/outgoing interface
Name	Tunnel name configured on the ingress node

# Display detailed information about MPLS TE tunnels.

<Sysname> display mpls te tunnel verbose

No	: 1
LSP-Id	: 1.1.1.9:1024
Tunnel-Name	: Tunnel0
Destination	: 3.3.3.9
In-Interface	: -
Out-Interface	: Eth1/0
Tunnel BW	: 0 kbps
Class Type	: bc0
Ingress LSR-Id	: 1.1.1.9
Egress LSR-Id	: 3.3.3.9
Setup-Priority	: 7
Hold-Priority	: 7
Sign-Protocol	: RSVP TE
Resv Style	: SE
IncludeAnyAff	: 0x0
ExcludeAllAff	: 0x0
IncludeAllAff	: 0x0
Created Time	: 2004/10/18 16:05:17