3Com MSR 30 Display voice call-info brief mark tag verbose, Range of 0 to, Information table

2576 CHAPTER 173: VOIP CONFIGURATION COMMANDS

Description Use the dial-programcommand to enter the voice dial program view.

Example # Enter the dial program view

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program

display voice call-info

Syntax	display voice call-info { brief mark tag verbose }
View	Any view
Parameter	brief: Displays the brief information of the call information table.
	mark TAG: Displays the call information of the call information table by tag (in the
	range of 0 to 127).
	verbose: Displays the detailed information of the call information table.
Description	Use the display voice call-infocommand to display the contents in the call
	information table.

Example # Display the brief information of the call information table at a certain point of time.

<Sysname> display voice		call-info brief
The information table		for current calls in brief
#
**************** CALL		0 ***************
ViIfIndex	: 2884067
Module ID	: LGS	CMC
#
End

#Display the detailed information of the call information table at a certain point of time.

<Sysname> display voice	call-info verbose
The information table	for current calls in detail
#
**************** CALL	0	***************
Call direction	: From PSTN
ViIfIndex	: 2884067
Related module ==>
Module ID	: LGS
Reference Numbers	: 2
Module ID	: CMC
Reference Numbers	: 1

Current used voice	entity : 2961
Voice entities are	offered :	2961

#

End