3Com MSR 50, MSR 30 manual Debugging bgp update vpls, For BGP Vpls Update messages, 1033

1033

debugging bgp update vpls

Syntax	debugging bgp update vpls [ peer { ipv4-addressgroup-name} ] [ receive send ] [
	verbose ]
	undo debugging bgp update vpls [ peer { ipv4-addressgroup-name} ] [ receive
	send ] [ verbose ]
View	User view
Default Level	1: Monitor level
Parameters	peer { ipv4-address group-name}: Enables/disables BGP VPLS update message
	debugging for the specified peer/peer group.
	receive: Enables/disables the debugging for the received BGP packets.
	send: Enables/disables the debugging for the sent BGP packets.
	verbose: Displays detailed debugging information.
Description	Use the debugging bgp update vpls command to enable debugging for BGP
	VPLS Update messages.
	Use the undo debugging bgp update vpls command to disable debugging
	for BGP VPLS Update messages.
	By default, this debugging is disabled.
	Enabling debugging may affect system performance; therefore, use this command
	only when necessary and disable debugging once the debugging operation is
	complete.

Table 232 Description on the fields of the debugging bgp update vpls command

Field	Description
afi = 196(vpls) safi = 128(vpls)	Address family is 196. Sub-address family is
	128 (VPLS).

Examples # In a VPLS environment, Device A and Device B have established a BGP peer

relationship. Enable debugging for BGP VPLS update messages.

<Sysname> debugging bgp update vpls

*0.84372 Sysname RM/7/RMDEBUG:

BGP.VPLS: Send			UPDATE to 1.1.1.1 for following destinations :
Origin		:	IGP
AS Path		:	200
Next Hop		: 5.5.5.5
afi =	155(vpls) safi = 128(vpls)
Route	Distinguisher:100:1
CE-ID:1
label	offset:0
label	base:20480