3Com MSR 50, MSR 30 manual Display bgp routing-table peer, Related commands display bgp peer, 975

975

Table 222 Description on the fields of the display bgp routing flap-info command

Field	Description
From	Source IP address of the route
Flaps	Number of routing flaps
Duration	Duration time of the flap route
Reuse	Reuse time of the flap route

Refer to Table 219 for description on the other fields above.

display bgp routing-table peer

Syntax display bgp routing-table peer ip-address { advertised-routesreceived-routes} [ network-address [ mask mask-length ] statistic ]

View Any view

Parameters ip-address: IP address of a peer.

advertised-routes: Displays routing information advertised to the specified peer.

received-routes: Displays routing information received from the specified peer.

network-address: IP address of the destination network.

mask: Mask of the destination network, in dotted decimal notation.

mask-length: Mask length, in the range 0 to 32.

statistic: Displays route statistics.

Description Use the display bgp routing-table peer command to display BGP routing information advertised to or received from the specified BGP peer.

Related commands: display bgp peer.

Examples # Display BGP routing information advertised to BGP peer 20.20.20.1.

<Sysname> display bgp routing-table peer 20.20.20.1 advertised-routes

Total Number of		Routes: 2
BGP	Local router ID is 30.30.30.1
Status codes: *		- valid, > - best, d - damped,
	h	- history, i - internal, s - suppressed, S - Stale
	Origin : i - IGP, e - EGP, ? - incomplete
	Network		NextHop	MED	LocPrf		PrefVal Path/Ogn
*>	30.30.30.0/24		0.0.0.0	0		0	i
*>	40.40.40.0/24		0.0.0.0	0		0	i

Refer to Table 219 for description on the fields above.