3Com MSR 30, MSR 50 manual Display bgp vpnv4 network, View Any view

1676 CHAPTER 98: MPLS L3VPN CONFIGURATION COMMANDS

Description Use the display bgp vpnv4 group command to display information about a specified or all BGP VPNv4 peer groups.

Example # Display information about BGP VPNv4 peer group a for VPN instance vpn1.

<Sysname> display bgp vpnv4 vpn-instance vpn1 group a

BGP peer-group is a
remote AS number not specified
Type : external
Maximum allowed prefix number: 150000
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 99
No routing policy is configured
Members:
Peer	V	AS	MsgRcvd	MsgSent	OutQ PrefRcv Up/Down			State
10.1.1.1	4	200	18	21	0	1	00:12:58	Established
Table 444 Description on the fields of the display bgp vpnv4 group command
Field				Description
BGP peer-group				Name of the BGP peer group
remote AS number				Number of the remote AS
Type				Type of the BGP peer group
Maximum allowed prefix number				Maximum number of routes that the VPN instance
				supports
Threshold				Threshold value
Configured hold timer value				Setting of the hold timer
Keepalive timer value				Keepalive interval
Minimum time between				Minimum route advertisement interval
advertisement runs
Peer Preferred Value				Weight for the routes from the peer
No routing policy is configured				Whether the VPN instance is configured with a routing
				policy
Peer				IP address of the peer
V				Version of BGP that the peer runs
AS				AS number of the peer group
MsgRcvd				Number of messages received
MsgSent				Number of messages sent
OutQ				Number of messages waiting to be sent to the peer
PrefRcv				Number of prefixes received
Up/Down				Duration of the BGP session in the current state
State				Status of the peer

display bgp vpnv4 network

Syntax display bgp vpnv4 { all vpn-instance vpn-instance-name} network

View Any view