3Com MSR 30, MSR 50 manual Voice vlan enable, Voice vlan mac-address

648CHAPTER 41: VOICE VLAN CONFIGURATION COMMANDS

Related command: display voice vlan state.

Example # Configure the aging time of the voice VLAN as 100 minutes.

<Sysname> system-view

[Sysname] voice vlan aging 100

voice vlan enable

Syntax voice vlan enable

undo voice vlan enable

View Ethernet interface view

Parameter None

Description Use the voice vlan enable command to enable the voice VLAN feature on an Ethernet port.

Use the undo voice vlan enable command to disable the voice VLAN feature on an Ethernet port.

No voice VLAN is enabled on a port by default.

■Under automatic mode, only The Trunk or Hybrid port can be configured with the voice VLAN feature. The Access port cannot be configured with this feature.

■Before enabling the voice VLAN feature on a port, ensure that its is enabled globally first

■Only after the voice VLAN feature is enabled under both system view and Ethernet interface view will it functions properly.

Example # Enable the voice VLAN attribute on the port Ethernet 1/0.

<Sysname> system-view

[Sysname] voice vlan 2 enable

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] voice vlan enable

voice vlan mac-address

Syntax voice vlan mac-address mac-addrmask oui-mask[ description text ]

undo voice vlan mac-address oui

View System view

Parameter mac-addr: MAC address, in the format of H-H-H, such as 1234-1234-1234.