3Com MSR 30, MSR 50 manual Sftp client ipv6 source, Undo sftp client ipv6 source

2186 CHAPTER 142: SSH2.0 CONFIGURATION COMMANDS

■ des: Encryption algorithm des-cbc.

prefer-ctos-hmac: Preferred HMAC algorithm from client to server, defaulted to sha1.

■ md5: HMAC algorithm hmac-md5.

■ md5-96: HMAC algorithm hmac-md5-96.

■ sha1: HMAC algorithm hmac-sha1.

■ sha1-96: HMAC algorithm hmac-sha1-96.

prefer-kex: Preferred key exchange algorithm, defaulted to dh-group-exchange.

■ dh-group-exchange: Key exchange algorithm diffie-hellman-group-exchange-sha1.

■ dh-group1: Key exchange algorithm diffie-hellman-group1-sha1.

■ dh-group14: Key exchange algorithm diffie-hellman-group14-sha1.

prefer-stoc-cipher: Preferred algorithm from server to client, defaulted to aes128.

prefer-stoc-hmac: Preferred HMAC algorithm from server to client, defaulted to sha1.

Description Use the sftp command to establish a connection to a remote IPv4 SFTP server and enter SFTP client view.

Note that when the client’s authentication method is publickey, the client needs to get the local private key for validation. As the publickey authentication includes RSA and DSA algorithms, you must specify an algorithm (by using the identity-keykeyword) in order to get the correct data for the local private key.

Example # Connect to SFTP server 10.1.1.2.

<Sysname> sftp 10.1.1.2 Input Username:

sftp client ipv6 source

Syntax	sftp client ipv6 source { ipv6 ipv6-addressinterface interface-type
	interface-number }
	undo sftp client ipv6 source
View	System view
Parameter	ipv6 ipv6-address: Specifies a source IPv6 address.
	interface interface-typeinterface-number: Specifies a source interface by its type
	and number.