3Com MSR 50, MSR 30 manual Local-address

	2167
Description	Use the interval-timecommand to set the DPD query triggering interval for a
	DPD.
	Use the undo interval-timecommand to restore the default.
	By default, the DPD query triggering interval is 10 seconds.
Example	# Set the DPD query triggering interval for dpd2 to 1 second.
	<Sysname> system-view
	[Sysname] ike dpd dpd2
	[Sysname-ike-dpd-dpd2] interval-time 1
local
Syntax	local { multi-subnet single-subnet }
	undo local
View	IKE peer view
Parameter	multi-subnet: Sets the subnet type to multiple.
	single-subnet: Sets the subnet type to single.
Description	Use the local command to set the subnet type of the local gateway for IKE
	negotiation.
	Use the undo local command to restore the default.
	By default, the subnet is a single one. You can use this command to enable
	interoperability with a Netscreen device.
Example	# Set the subnet type of the local gateway to multiple.
	<Sysname> system-view
	[Sysname] ike peer xhy
	[Sysname-ike-peer-xhy] local multi-subnet
local-address
Syntax	local-address ip-address
	undo local-address
View	IKE peer view

Parameter ip-address: IP address of the local gateway in IKE negotiation.