3Com MSR 50, MSR 30 manual MAC Address Table Management Configuration Commands, Display mac-address

MAC ADDRESS TABLE MANAGEMENT

165 CONFIGURATION COMMANDS

n	Interfaces that MAC address table management involves can only be Layer 2
	Ethernet interfaces.
display mac-address
Syntax	display mac-address blackhole [ vlan vlan-id] [ count ]
	display mac-address [ mac-address[ vlan vlan-id] [ dynamic static ] [ interface
	interface-type interface-number ] [ vlan vlan-id ] [ count ] ]
View	Any view
Parameter	blackhole: Displays blackhole MAC address entries. These entries do not age but
	you can add or remove them. The packets whose destination MAC addresses
	match blackhole MAC address entries are dropped.
	vlan vlan-id: Displays MAC address entries of the specified VLAN, where vlan-idis
	in the range 1 to 4094.
	count: Displays the total number of MAC addresses in the MAC address table.
	mac-address: Specifies a MAC address in the format of H-H-H.
	dynamic: Displays dynamic MAC address entries. Aging time is set for these
	entries.
	static: Displays static MAC address entries. Similar to blackhole MAC address
	entries, these entries do not age but you can add or remove them.
	interface interface-typeinterface-number: Displays the MAC address entry of a
	specified interface, where interface-typeinterface-numberspecifies an interface
	by its type and number.
Description	Use the display mac-addresscommand to display information about the MAC
	address table.
Related commands:	mac-address (system view), mac-address (Ethernet interface view),
	mac-address timer.

Example # Display the MAC address table entry for MAC address 00e0-fc01-0101.