3Com MSR 30, MSR 50 manual Snmp-agent mib-view, Undo snmp-agent mib-view view-name

2340 CHAPTER 154: SNMP CONFIGURATION COMMANDS

set-operation:Enables logging of SNMP SET operation.

Description Use the snmp-agent log command to enable SNMP logging.

Use the undo snmp-agent log command to restore the default.

By default, SNMP logging is disabled.

If a specified SNMP logging is enabled, when NMS performs a specified operation to SNMP Agent, the latter records the operation-related information and saves it to the information center.

Example # Enable logging of SNMP GET operation.

<Sysname> system-view

[Sysname] snmp-agent log get-operation

# Enable logging of SNMP SET operation.

<Sysname> system-view

[Sysname] snmp-agent log set-operation

snmp-agent mib-view

Syntax	snmp-agent mib-view { excluded included } view-nameoid-tree[ mask
	mask-value ]
	undo snmp-agent mib-view view-name
View	System view
Parameter	excluded: Indicates that not all nodes of the MIB tree are included in current view.
	included: Indicates that all nodes of the MIB tree are included in current view.
	view-name: View name, a string of 1 to 32 characters.
	oid-tree: MIB subtree. It can only be an OID string, such as 1.4.5.3.1, or an object
	name string, such as “system”. OID is made up of a series of integers, which
	marks the position of the node in the MIB tree and uniquely identifies a MIB
	object.
	mask mask-value: Mask for an object tree, in the range 1 to 32 hexadecimal
	digits. It must be an even digit.
Description	Use the snmp-agentmib-viewcommand to create or update MIB view
	information so that MIB objects can be specified.
	Use the undo snmp-agentmib-viewcommand to delete the current
	configuration.
	By default, MIB view name is ViewDefault.