3Com MSR 50, MSR 30 User-name-format Radius scheme view, Related command radius scheme, retry

1973

obtain the RADIUS service. The NAS uses the RADIUS server response timeout timer to control the transmission interval.

■A proper value for the RADIUS server response timeout timer can help improve the system performance. Set the timer based on the network conditions.

■The maximum total number of all types of retransmission attempts multiplied by the RADIUS server response timeout period cannot be greater than 75.

Related command: radius scheme, retry.

Example # Set the RADIUS server response timeout timer to 5 seconds for RADIUS scheme radius1.

<Sysname> system-view

[Sysname] radius scheme radius1

[Sysname-radius-radius1] timer response-timeout 5

user-name-format (RADIUS scheme view)

Syntax	user-name-format { with-domain without-domain }
View	RADIUS scheme view
Parameter	with-domain: Includes the ISP domain name in the username sent to the RADIUS
	server.
	without-domain: Excludes the ISP domain name from the username sent to the
	RADIUS server.
Description	Use the user-name-formatcommand to specify the format of the username to
	be sent to a RADIUS server.
	By default, the ISP domain name is included in the username.
	Note that:
	■ A username is generally in the format of userid@isp-name, of which isp-name
	is used by the device to determine the ISP domain to which a user belongs.
	Some earlier RADIUS servers, however, cannot recognize a username including
	an ISP domain name. Before sending a username including a domain name to
	such a RADIUS server, the device must remove the domain name. This
	command is thus provided for you to decide whether to include a domain
	name in a username to be sent to a RADIUS server.
	■ If a RADIUS scheme defines that the username is sent without the ISP domain
	name, do not apply the RADIUS scheme to more than one ISP domain, thus
	avoiding the confused situation where the RADIUS server regards two users in
	different ISP domains but with the same userid as one.

Related command: radius scheme.