3Com MSR 50 Display mpls ldp Isp, All Displays information about all LSPs established by LDP

1521

Table 372 Description on the fields of the display mpls ldp interface command

Field	Description
Interface Name	Name of an LDP-enabled interface
LDP ID	LDP identifier
Transport Address	Transport address of the entity, also used for TCP
	connection
Entity Status	Status of the entity, active or inactive
Interface MTU	MTU of the interface
Label Advertisement Mode	Label advertisement mode, DoD or DU
Configured Keepalive Timer	Value of the configured Keepalive timer
Configured Hello Timer	Value of the configured Hello timer
Negotiated Hello Timer	Value of the negotiated Hello timer
Hello Message Sent/Rcvd [X/Y]	X: Number of Hello messages sent from the interface
	Y: Number of Hello messages received by the interface

display mpls ldp Isp

Syntax	display mpls ldp lsp [ vpn-instancevpn-instance-name [ destination-address
	mask-length ] ] [ { begin exclude include } regular-expression ]
	display mpls ldp lsp all [ { begin exclude include } regular-expression]
	display mpls ldp lsp [ dest-addrmask-length] [ { begin exclude include }
	regular-expression ]
View	Any view
Parameter	all: Displays information about all LSPs established by LDP.
	vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31
	characters.
	dest-addr: Destination address of the LSP.
	mask-length: Length of the mask for the destination address, in the range 0 to 32.
	: Filters the output information.
	begin: Begins with the specified string.
	include: Includes the specified string.
	exclude: Excludes the specified string.
	regular-expression: Regular expression, a string of 1 to 80 characters. No blank
	space is acceptable.
Description	Use the display mpls ldp lsp command to display information about LSPs
	established by LDP.