6.Continue with “Setting basic parameters” on page
Note: In some occasions, your operating system might not detect the new hardware. This might happen when:
•The notebook computer into which you want to install the
•A previous installation of the
Installing the device drivers in Windows NT
Note: If networking is not installed, you are prompted whether you want it installed. Click Yes; then follow the
To install the device drivers in Window NT, do the following:
1.Install Client Manager using the instructions in “Installing the Client Manager software” on page
2.Insert the
3.Follow the
4.When Windows completes the device driver installation, continue with “Setting basic parameters” on page
Installing the device drivers in Windows 2000
To install the device drivers in Windows 2000, do the following:
1.Install Client Manager using the instructions in “Installing the Client Manager software” on page
2.Insert the
3.The Digital Signature Not Found window might open, depending on your version of Windows 2000. Click Yes to continue.
4.Windows 2000 completes completes the installation of the device drivers. Continue with “Setting basic parameters” on page
Selecting the Miniport device driver
If your Windows operating system automatically detected your hardware, you are prompted to select a device driver from a list or to install the device driver from a diskette provided by the hardware manufacturer. If the correct device drivers are automatically found, go to “Setting basic parameters” on page
To select the miniport device driver, do the following:
1.In the Select Network Adapter window, click Have Disk.
2.Be sure that the
