3Com MSR 50, MSR 30 manual Callednumber receive-method, Related command gw-access-number, 2727

2727

Example # Enable the authorization function for one-stage dialing users.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] aaa-client [Sysname-voice-aaa] authentication-did

[Sysname-voice-aaa] authorization-did

# Disable the authorization function for one-stage dialing users.

[Sysname-voice-aaa] undo authorization-did

callednumber receive-method

Syntax callednumber receive-method { immediate terminator }

undo callednumber receive-method

View Access number view

Parameter immediate: Specifies the voice gateway to originate a call immediately it collects all digits of a called number.

terminator: Specifies users to press the dial terminator # after dialing a called number.

Description Use the callednumber receive-methodcommand to configure the method of collecting digits of a called number.

Use the undo callednumber receive-method command to restore the default.

By default, users need to press the dial terminator # after dialing all digits of a called number.

This command is applicable to both the one-stage dialing process and two-stage dialing process. In the terminator mode, the voice gateway can immediately originate a call only after users dial a called number and press the dial terminator #, and otherwise, the voice gateway will not originate a call until timeout. In the immediate mode, the voice gateway can originate a call immediately it collects all digits of a called number, without waiting users to press the dial terminator #. The immediate mode simplifies users’ operations.

Related command: gw-access-number.

Example # Set the method of collecting digits of called numbers to immediate for the access number 17909.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program

[Sysname-voice-dial] gw-access-number 17909 [Sysname-voice-dial-anum17909] callednumber receive-method immediate