3Com MSR 30, MSR 50 manual Pim hello-option neighbor-tracking, Pim hello-option override-interval

1414 CHAPTER 90: PIM CONFIGURATION COMMANDS

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] pim hello-option lan-delay 200

pim hello-option neighbor-tracking

Syntax	pim hello-option neighbor-tracking
	undo pim hello-option neighbor-tracking
View	Interface view
Parameter	None
Description	Use the pim hello-option neighbor-tracking command to disable join
	suppression, namely enable neighbor tracking, on the current interface.
	Use the undo pim hello-option neighbor-tracking command to enable join
	suppression.
	By default, join suppression is enabled, namely neighbor tracking is disabled.
Related command:	hello-optionneighbor-tracking (PIM view).
Example	# Disable join suppression on Ethernet 1/0.
	<Sysname> system-view
	[Sysname] interface ethernet 1/0
	[Sysname-Ethernet1/0] pim hello-option neighbor-tracking

pim hello-option override-interval

Syntax pim hello-option override-interval interval

undo pim hello-option override-interval

View Interface view

Parameter interval: Prune override interval in milliseconds, with an effective range of 1 to 65,535.

Description Use the pim hello-optionoverride-intervalcommand to configure the prune override interval on the current interface.

Use the undo pim hello-option override-interval command to restore the default setting.

By default, the prune override interval is 2,500 milliseconds.