3Com MSR 50 Display radius statistics, Example # Display statistics about Radius packets, 1953

			1953
	Table 510 Description on the fields of the display radius scheme command
	Field	Description
	Primary Auth IP/ Port/ State	IP address/access port number/current status of the primary
		authentication server: (active or block)
	Primary Acct IP/ Port/ State	IP address/access port number/current status of the primary
		accounting server: (active or block)
	Second Auth IP/ Port/ State	IP address/access port number/current status of the
		secondary authentication server: (active or block)
	Second Acct IP/ Port/ State	IP address/access port number/current status of the
		secondary accounting server: (active or block)
	Auth Server Encryption Key	Shared key of the authentication server
	Acct Server Encryption Key	Shared key of the accounting server
	Accounting-On packet disable	The accounting-on function is disabled
	send times	Retransmission times of accounting-on packets
	interval	Interval to retransmit accounting-on packets
	Interval for timeout(second)	Timeout time in seconds
	Retransmission times for timeout Times of retransmission in case of timeout
	Interval for realtime	Interval for realtime accounting in minutes
	accounting(minute)
	Retransmission times of	Retransmission times of realtime-accounting packet
	realtime-accounting packet
	Retransmission times of	Retransmission times of stop-accounting packet
	stop-accounting packet
	Quiet-interval(min)	Quiet interval for the primary server
	Username format	Format of the username
	Data flow unit	Unit of data flows
	Packet unit	Unit of packets
	Total 1 RADIUS scheme(s)	1 RADIUS scheme in total
display radius statistics
Syntax	display radius statistics
View	Any view
Parameter	None
Description Use the display radius statistics command to display statistics about RADIUS
	packets.
Related command: radius scheme.
Example # Display statistics about RADIUS packets.
	<Sysname> display radius statistics
	state statistic(total=1024):
	DEAD= = 1024	AuthProc= = 0	AuthSucc= = 0
	AcctStart= = 0	RLTSend= = 0	RLTWait= = 0