3Com MSR 50, MSR 30 manual Timer query MLD view, Related command, Timer query interval

	1459
Description	Use the timer other-querier-presentcommand to configure the MLD other
	querier present interval globally.
	Use the undo timer other-querier-presentcommand to restore the default
	configuration.
	By default, the MLD other querier present interval is determined by the following
	formula:
	MLD other querier present interval = [ MLD query interval ] times [ MLD querier
	robustness variable ] plus [ maximum response delay for MLD general queries ]
	divided by two.
n	By default, the values of the three parameters in the above-mentioned formula are
	125, 2, and 10, respectively, so the default MLD other querier present interval is
	125 x 2 + 10 / 2 = 255 (seconds).
Related command:	mld timer other-querier-present,timer query (MLD view), robust-count
	(MLD view), max-response-time (MLD view), and display mld interface.
Example	# Set the MLD other querier present interval for non-queriers to 200 seconds
	globally.
	<Sysname> system-view
	[Sysname] mld
	[Sysname-mld] timer other-querier-present 200
timer query (MLD view)
Syntax	timer query interval
	undo timer query
View	MLD view
Parameter	interval: Query interval, namely, amount of time in seconds between MLD general
	query messages, in the range of 1 to 18,000.
Description	Use the timer query command to configure the query interval globally.
	Use the undo timer query command to restore the default configuration.
	By default, the query interval is 125 seconds.
Related command:	mld timer query, timer other-querier-present (MLD view), and display mld
	interface.
Example	# Set the query interval to 200 seconds globally.

<Sysname> system-view [Sysname] mld [Sysname-mld] timer query 200