JVC UX-H33 manual With the source to play, Adjust the clock if you need, Press STANDBY/ON

English

4Select the timer (Daily Timer or Recording Timer)

with the source to play.

On the remote control:

Press UP or DOWN to select the timer, then press

CLOCK/TIMER.

On the unit:

Press ¢ or 4 to select the timer, then press TIMER/SNOOZE.

•Each time you press UP

(¢) or DOWN (4), the timer mode and the source change as follows:

UP

DOWN

CLOCK / TIMER

TIMER/SNOOZE

6Adjust the clock if you need.

• See “Setting the Clock” on page 10.

7 Press STANDBY/ON		STANDBY/ON
(or	on the unit) to turn
off the unit (standby) if you
have set the timer with the
unit turned on.

•When the timer turns on the unit, the (timer) indicator starts flashing. (If the Recording Timer is selected in step 4, the REC indicator also starts flashing.)

To deactivate the timer temporarily,	CLOCK
	/ TIMER

REC

TUNER TUNER

TAPE CD

TUNER : tunes in to the last station you were listening to. (Daily Timer)

REC TUNER : records the last station you were listening to. (Recording Timer)

•Put a recordable cassette into the deck.

CD : plays a disc. (Daily Timer)

•Load a disc.

TAPE : plays a tape. (Daily Timer)

•Make sure that the tape is in the cassette deck.

•Make sure that the tape direction is correct.

The unit enters the volume level setting mode.

5Select the volume level.

On the remote control:

Press UP or DOWN to set the volume level, then press CLOCK/TIMER.

On the unit:

Press ¢ or 4 to set the volume level, then press TIMER/SNOOZE.

•You can select the volume level

(“VOLUME – –” and “VOLUME 0” to “VOLUME 40”).

If you select “VOLUME – –,” the volume is set to the previous level when the unit was turned off.

•To turn off the volume while the Recording Timer (REC TUNER) is working, set the volume level “VOLUME 0.”

The unit enters the clock setting mode.

press and hold CLOCK/TIMER (or

TIMER/SNOOZE on the unit) until the (timer) indicator on the display goes off.

TIMER/SNOOZE

To activate or change the timer

(with the previous setting), follow steps 1 to 7 on pages 20 and 21.

•If you want to change the timer setting after the Daily Timer be used, first deactivate the timer.

•If the unit is turned on when the timer on-time comes Timer does not work.

•When you unplug the power cord or if a power failure occurs

The timer will be canceled. You need to set the clock first, then the timer again.

21