JVC CA-UXZ7MD Using Recording Timer, How Recording Timer actually works, Rec Timer Daily Timer

Continued

English

There are three timers available—Recording Timer, Daily Timer and Sleep Timer.

•Before using these timers, make sure the built-in clock is set correctly (see page 12).

•When using the tuner as the source, preset stations in advance (see page 18).

Using Recording Timer

With Recording Timer, you can make an unattended recording.

•You can set Recording Timer whether the unit is turned on or in standby mode.

•To correct a mis-entry any time during the setting process, press CANCEL.

•To exit from the timer setting mode during the setting process, press CLOCK/TIMER repeatedly until the source indication appears.

How Recording Timer actually works

The unit automatically turns on, muting the volume, and starts recording on the MD or on the tape when the timer- on time comes. Then, when the timer-off time comes, the unit automatically turns off (stands by).

Recording Timer works only once, but the timer settings remain stored in memory until you reset them or unplug the AC power cord.

1 Press CLOCK/TIMER repeatedly until “REC TIMER” appears in the main display.

The timer ( ) indicator lights up and the REC indicator starts flashing on the display.

•Each time you press the button, the timer mode change as follows:

REC TIMER DAILY TIMER

Source indication Clock time (canceled)

2 Press SET.

The source name flashes in the main display.

3 Select the source to record.

1)Press ¢or 4repeatedly to select the source.

•Each time you press the button, the source changes as follows:

FM AM

AUX

•When you select “FM” or “AM,” press SET, then select a preset number by pressing ¢or 4.

•When you select “AUX,” set the timer function of the external component as well.

2)Press SET.

The device to be recorded onto flashes in the main display.

4 Select the device to be recorded onto.

1) Press ¢or 4repeatedly to select the device.

MD REC TAPE REC

2)Press SET.

•When you select “MD REC,” select the recording length mode (see page 36) by pressing ¢or 4, then press SET again.

•When you select “TAPE REC,” select the reverse mode (see page 39) by pressing REV.MODE.

The hour digit of the timer-on time starts flashing.

5 Set the timer-on time.

1)Press ¢or 4repeatedly to adjust the hour. You can adjust the hour using the number buttons.

2)Press SET.

The minute digit starts flashing.

3)Press ¢or 4repeatedly to adjust the minute. You can adjust the minute using the number buttons.

Ex.: When you set timer-on time to 11:30.

4)Press SET.

The hour digit of the timer-off time starts flashing.

To be continued on the next page ]

– 60 –