JVC CA-UXZ7MD manual Precautions on CD Playback, Playing Back the Entire CD-NormalPlay, English

Precautions on CD Playback

This unit has been designed to play back discs bearing the following logos:

Audio CD

CD Recordable (CD-R)

CD ReWritable (CD-RW)

In addition to the above discs, this unit can play back audio data recorded on CD Text, CD-G (CD Graphics), and CD-Extra.

When playing a CD-R or CD-RW

User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) can be played back when they are already “finalized.” If you try to play back unfinalized discs, “CD NO DISC” may appear in the main display.

•You can play back your original CD-Rs or CD-RWs recorded in audio CD format ONLY. (If CD-RWs have been recorded in different format, erase all the data on CD-RWs completely before re-recording on the discs.)

DO NOT play back CD-Rs or CD-RWs recorded with sound files such as MP3.

•Before playing back CD-Rs or CD-RWs, read their instructions or cautions carefully.

•Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.

Important notices:

•In general, you will have the best performance by keeping your discs and the mechanism clean.

–Store discs in their cases, and keep them in cabinets or on shelves.

–Keep the unit’s disc tray closed when not in use.

•Continuous use of irregular shaped discs (heart-shape, octagonal, etc.) can damage the disc rotating mechanism.

Playing Back the Entire CD—Normal Play

1 Press CD 0 on the main unit.

The unit automatically turns on, the electronic swing panel slides downward, then the disc tray comes out.

Disc tray

Electronic swing panel

2 Place a disc correctly on the circle of the disc tray with its label side up.

Good No good

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

3 Press CD 3/8.

The disc tray closes, then the electronic swing panel slides upward automatically.

The CD indicator starts flashing on the display and disc playback starts from the first track of the disc.

•If you press CD 0 instead of CD 3/8, the disc tray and electronic swing panel close, but disc playback does not start.

CD (disc) indicator

The current track No. Elapsed playing time

Disc playback stops after playing all the tracks of the disc.

English

• CD-RWs may require a longer readout time since the
reflectance of CD-RWs is lower than for regular CDs.	To stop during play, press 7.
	To remove the disc, press CD 0.
	• After removing the disc, press CD 0 again to close the
	disc tray.

– 20 –