JVC CA-UXZ7MD, LVT0900-004A Connecting External Equipment, English, To remove the speaker grilles

Models: CA-UXZ7MD LVT0900-004A

1 76
Download 76 pages 58.31 Kb
Page 13
Image 13
To remove the speaker grilles

Continued

English

To remove the speaker grilles

The speaker grilles are removable as illustrated below:

Holes Projections

Speaker grille

To remove the speaker grille, insert your fingers at the top of the speaker grille, then pull towards you. Also pull the bottom towards you.

To attach the speaker grille, put the projections of the speaker grille into the holes of the speaker.

Caution on installation

This unit is compact but high powered, so it has a built- in cooling fan which operates when the internal heat rises due to continuous use and/or high volume level. If you want to place speakers or any equipment on the sides of the unit, leave a space of at least 1 cm between the main unit and each of them to obtain sufficient cooling effect.

Connecting External Equipment

You can connect another equipment which can be used as a playback device.

When you connect and use the equipment, refer also to its manual supplied.

• DO NOT connect other equipment while the power is on.

DO NOT plug in any equipment until all connections are complete.

To connect external equipment

Be sure that the plugs of the audio cords and the jacks on the rear of the unit are color-coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.

 

Right

External equipment

 

 

Left

 

R

 

L

 

To AUX/DVD jacks

SPEAKERS

R

L

CAUTION: R

L

SPEAKER IMPEDANCE 4~16

– 8 –

Page 13
Image 13
JVC CA-UXZ7MD, LVT0900-004A Connecting External Equipment, English, To remove the speaker grilles, Caution on installation