English
Adding a Track to a Group—ENTRY GR
This function allows you to enter a track into a group. The track will be added as the last track in the selected group. The track numbers will be renumbered.
•To stop any time during the editing process before step 8, press GROUP TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the very
1 Insert an MD you want to edit into the MD loading slot.
2 Press GROUP TITLE/EDIT repeatedly until “ENTRY GR ?” appears in the main display.
•If you want to stop this editing process, press
CANCEL.
3 Press SET.
•During playback:
The currently playing track number starts flashing.
4 Press ¢or 4to select the track.
•You can select the track using the number buttons. In this case, the selected track starts playback repeatedly.
Ex.: When track 13 is selected.
5 Press SET.
•If the loaded MD has no group, you cannot go to the following steps.
•When the selected track belongs to a group, its group number appears in the main display.
•To cancel the setting, press CANCEL, then repeat from step 4.
6 Press GROUP SKIP |
| or GROUP SKIP |
| to |
|
| |||
|
| |||
select the group. |
|
|
|
|
Ex.: When group 18 is selected.
7 Press SET.
•To cancel the setting, press CANCEL, then repeat from step 4.
8 Press ENTER.
“EDITING” appears in the main display for a while, then “WRITING” and the MD REC indicator flash while the editing you have made is being recorded on the MD.
When “CANNOT ENTRY!” appears in step 7
You are trying to enter the selected track into the same group again. Repeat procedure from step 6.