Presetting Stations
You can preset 30 FM and 15 AM stations manually.
In some cases, test frequencies have been already memorized for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations you want into memory by following the presetting method.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.
On the remote control ONLY:
1 Tune in to the station (either FM or AM) you want to preset.
• See “Tuning in to a Station” on the previous page.
2 Press SET.
The preset number starts flashing as follows:
Ex.: When you select an FM station in step 1.
• The unit always starts from the preset number 1.
3 Press the number buttons to select a preset number.
Ex.: For preset number 5, press 5.
For preset number 15, press +10, then 5. For preset number 20, press +10, then 10.
For preset number 30, press +10, +10, then 10.
•You can also select the preset number by pressing ¢or 4.
4 Press SET again.
“STORED” appears in the main display for a while.
The tuned station in step 1 is stored in the preset number selected in step 3.
•Storing a new station on a used number erases the previously stored one.
When you unplug the AC power cord or if a power failure occurs
The FM and AM preset stations will be erased in a day. If this happens, preset the stations again.
Tuning in to a Preset Station
On the remote control ONLY:
1 Press FM/AM/AUX to select either “FM” or “AM.”
When you press the button for the first time, the unit automatically turns on with the last selected source.
•Each time you press the button, the source changes as follows:
FM 
AM
AUX
2 Press the number buttons to select a preset number.
Ex.: For preset number 5, press 5.
For preset number 15, press +10, then 5. For preset number 20, press +10, then 10.
For preset number 30, press +10, +10, then 10.
English
