English
Turning On the Power
When you press one of the source selecting buttons, the unit automatically turns on (and starts playback if the source is ready).
On the remote control:
On the main unit | * | * |
* Pressing CD 0 or MD 0 also turns on the unit.
Setting the Auto Power Off
Using Auto Power Off function, the unit automatically turns itself off if no sound comes in for more than 3 minutes except when FM or AM is selected as the source. If any operation is done during this
On the remote control ONLY:
To activate Auto Power Off, press A.P.OFF.
The A.P.off (Auto Power off) indicator lights up on the display.
•When no sound comes in, the A.P.off indicator starts flashing on the display. About 20 seconds before the unit turns itself off, “AUTO POWER OFF” starts flashing in the main display.
A.P.off indicator
To turn on the unit without playing, press
STANDBY/ON (or on the main unit). The STANDBY lamp on the main unit goes off. “HELLO” appears in the main display.
To turn off the unit (on standby), press
STANDBY/ON (or on the main unit) again. The STANDBY lamp on the main unit lights up. “SEE YOU” appears in the main display.
•“0:00” flashes in the main display until you set the
•A little power is always consumed even while the unit is in standby mode.
To switch off the power supply completely, unplug the
AC power cord from the AC outlet.
When you unplug the AC power cord or if a power failure occurs
The clock setting and other settings will be erased.
To deactivate Auto Power Off, press A.P.OFF again. The A.P.off indicator goes off from the display.
Turning On/Off the Key-touch Tone
If you do not want the
On the remote control ONLY:
Press BEEP.
•Each time you press the button, the
BEEP ON* BEEP OFF
*The