JVC CA-UXZ7MD, LVT0900-004A manual English, Fm Amcd Aux Tape Md

3 Select the source to play back.

1)Press ¢or 4repeatedly to select the source.

•Each time you press the button, the source changes as follows:

FM AMCD

AUX TAPE MD

•You can also use the source selecting buttons.

•When you select “CD,” “MD” or “TAPE,” prepare it for playing back.

•When you select “FM” or “AM,” press SET, then select a preset number by pressing ¢or 4.

•When you select “AUX,” set the timer function of the external component as well.

2)Press SET.

The hour digit of the timer-on time starts flashing.

4 Set the timer-on time.

1)Press ¢or 4repeatedly to adjust the hour. You can adjust the hour using the number buttons.

2)Press SET.

The minute digit starts flashing.

3)Press ¢or 4repeatedly to adjust the minute. You can adjust the minute using the number buttons.

Ex.: When you set timer-on time to 7:00.

4)Press SET.

The hour digit of the timer-off time starts flashing.

5 Set the timer-off time.

1)Press ¢or 4repeatedly to adjust the hour. You can adjust the hour using the number buttons.

2)Press SET.

The minute digit starts flashing.

3)Press ¢or 4repeatedly to adjust the minute. You can adjust the minute using the number buttons.

6 Adjust the volume level.

1)Press ¢or 4repeatedly to adjust the volume level.

•You can adjust the volume level to “– –” or within the range of 0 (silent) to 40 (maximum).

•When you select “VOLUME – –,” the volume is set to the current volume level.

2)Press SET.

The DAILY indicator stops flashing and remains lit. The contents of this setting appear in the main display for your confirmation.

7 Press STANDBY/ON (or on the main unit) to turn off the unit if necessary.

20 seconds before the timer-on time, the DAILY indicator and “DAILY TIMER STANDBY” start flashing on the display.

To turn off the Daily Timer after its setting is done

1Press CLOCK/TIMER repeatedly until “DAILY TIMER” appears in the main display.

2Press CANCEL.

The timer ( ) and DAILY indicators go off from the display.

To turn on the Daily Timer again

1Press CLOCK/TIMER repeatedly until “DAILY TIMER” appears in the main display.

2Press SET repeatedly until the settings are shown in the main display for your confirmation.

The timer ( ) and DAILY indicators light up on the display.

If the unit is kept turned on when the timer-on time comes

Daily Timer does not work at all.

English

Ex.: When you set timer-off time to 8:00.	Daily Timer will be canceled and the unit will not
4) Press SET.	turn off automatically in the following cases:
The volume setting appears in the main display.	• When you change the source.
	• When you enter the MD editing or title entry mode.
	• When you turn off the Daily Timer (see above).

– 62 –