Moving a Group—MOVE GR
This function allows you to move a group.
Once a group is moved, the tracks and the other groups are renumbered.
•To stop any time during the editing process before step 8, press GROUP TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the very
1 Insert an MD you want to edit into the MD loading slot.
2 Press GROUP TITLE/EDIT repeatedly until “MOVE GR ?” appears in the main display.
•If you want to stop this editing process, press
CANCEL.
3 Press SET.
•If the loaded MD has only one or no group, you cannot go to the following steps.
•During playback:
The group number of the currently playing track will appear. If the track does not belong to any group, the group number will be indicated by “–
4 Press GROUP SKIP or GROUP SKIP to select the group you want to move.
Ex.: When group 3 is selected.
5 Press SET.
•To cancel the setting, press CANCEL, then repeat from step 4.
6 Press GROUP SKIP or GROUP SKIP to select the position where you want to move the group.
Ex.: When group 3 is moved to group 10.
7 Press SET.
•To cancel the setting, press CANCEL, then repeat from step 4.
8 Press ENTER.
“EDITING” appears in the main display for a while, then “WRITING” and the MD REC indicator flash while the editing you have made is being recorded on the MD.
English