Setting POP server | Sanyo Projector specification

E-mail setting

4Setting POP server

When "POP before SMTP" is selected at "Auth" of "SMTP Authentication setting", enter "POP server*2" and "POP server port" and click Set button.

*2 The POP server is a server for receiving e-mail.

Please contact your network administrator to have this POP server address.

Error message for sending alert mail

When the projector has an abnormality, an alert message will be sent to the registered E-mail address.

If the SMTP server is missing or the authen- tication is not completed because of input error in E-mail address setting or SMTP authentication setting when sending alert e-mail, the error message will be displayed. Please check the respective settings.

5Option selection for sending alert mail

Click Option sub menu tab. Check the condition items under which alert mail will be sent and click Set button.

Please refer to item "Examples :Type and contents of alert mail" described on the next page.

Error message for missing SMTP server

Error information

Error message for authentication problem

Error information

Option

✐"When PJ lamp is off" signifies the lamp goes out without user operation. "When PJ is turned into Standby in proper user operation" signifies that the projector is turned on by using the web browser and then it is turned into standby with ON/STANDBY button on the side control or the remote control.

✐Up to 99,999 hours can be set for use time.

ENGLISH

27

Image 27

Sanyo Projector owner manual Setting POP server, Error message for sending alert mail

Contents

Network Set-up and Operation Wired Setting Projector Set-up and Operation Compliance Federal Communications Commission Notice Safety instructions Table of contents Chapter Internet Intranet Features Required operating environment for computers Network specifications of the projector Expression/Abbreviation Use of this manualTrademarks Flow of installation Connect the LAN and set the configurationNetwork Configuration has completed Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Numerical value is a setting example 169.254.100.100 255.255.0.0255.255.255.255 Setup Procedures Chapter Basic Setting and Operation Login the setting page of the projector LoginEnter the IP address Setting Display of main settingMain setting page in the display Sub menu tab Switches the sub menu tab Main menu Example of the setting How to use the setting Select items by ticking on check boxes Select an item by selecting a radio button Initial setting Whats PJLink? Network PIN code settingPJLink and password setting To 32 alphanumeric characters can be used for the password Sets Dhcp configuration ON/OFF Network configuration Mail setting Check / Delete Setting Smtp server and administrator addressSetting Smtp authentication Registering and deleting E-mail addresses Error message for sending alert mail Setting POP server Examples Type and contents of alert mail Enter user name of the projector etc. optional Snmp settingEnter community name to send Trap. Default name is public PJ information Up to 99,999 hours can be set for the time setting Trap check/deleteClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector PJ status Power control and status checkService in need Displays the status of the projectors power. Refer to next Status Description About projector condition Input Control Meet the input signal are listed SystemItem Description Image mode Video Computer Image adjustment PC adjustment Screen setting Setting up the projector Normal Full Wide169 Zoom True Natural wide Custom Lens adjustmentScreen mode Video Input source Setting Clear the adjustment values. Select Resets the settings of Picture in PictureStores the adjustment values. Select a Mode no. User1 User5 from the pull Shutter management...Sets the shutter management operation Default, OFFRemote control Sets on or off the logo display on Sets the digital processing Sets the color of the contents. ColorTime, Network PIN code, Network setting Settings, etc Information InformationItems Description Network Indication of the lamp status Indication of the filter statusStatus Chapter Appendix Peer-To-Peer connection Examples of connection To another network Gateway Router installed in the network Use of telnet ControlUse the IP address assigned to the projector Menu display on Password 1234 is used for the exampleCommand Function C00 Power on C01 Power off C05 Input C06 C07 C08 Web browser setting Active Script/JavaScript enableProxy setting Examples OS/Browsers Windows XP ProfessionalInternet Explorer Proxy setting Netscape Navigator JavaScript Setting Safari MAC OS X v How can I restrict access from the computer Why doesn’t the setting page appear in my web browser? How can I install several projectors? Operation Why am I not receiving E-mail alert messages? What are the rules for IP address assignment? What is the MAC address assigned to the projector? Can I update the firmware of the projector SO-KL8A