32
Chapter 4 Controlling the Projector
Power control and status check
Click Power & Status on the main menu. The control page will be dis- played.
By clicking ON or Standby button on the page, the power of the projector can be controlled.
Confirmation window as shown in the below appears when the Standby button is pressed.
Warning temperature icon | Popup confirmation window |
Item | Description |
|
|
PJ status |
|
Power | Displays the status of the lamp. (ON, OFF, On starting up, On cooling down, |
Status | Service in need) |
Displays the status of the projector's power. (Refer to next page.) | |
Power control | Controls the projector power by clicking the "ON" or "Standby" button. |
PJ temp.
External temp. A...Displays the surrounding temperature of the intake vent.
Inside temp. A .......Displays the temperature inside of the projector.
*The warning icon will appear if the temperature exceeds a specified value. Check if there is no object to obstruct the airflow around the intake or exhaust vent. It might be airfilter clogged. Replace the airfilter with new one.
*The temperature unit can be set either Centigrade or Fahrenheit in the item "Initial Setting". (+p.22)
✐The projector cannot be turned on while the projector is on cooling down.
✐ The web browser checks and updates the projector's condition every 30 seconds automatically.
