Indication of the lamp status, Status | Sanyo Projector instruction

Chapter 4 Controlling the Projector

Indication of the lamp status

Icon display/background	Status
White/Blue	Lamp on (Normal)

White/Red	Lamp on (Lamp is being used over a specified use time, replace lamp
White/Red	immediately)
Gray/Blue	Lamp off (Normal)

Gray/Red	Lamp off (Lamp is being used over a specified use time, replace lamp
Gray/Red	immediately)
Red/Blue with X	Lamp failure (Lamp failure, check lamp condition)

Red/Red with X	Lamp failure (Lamp failure and lamp is being used over a specified use
Red/Red with X	time, replace lamp immediately)

Indication of the filter status

Icon display/background	Status
Blue	Good condition.
Blue

Yellow/Gray	Filter is almost clogged.

	Filter is clogged. Replace a filter with new one.
Red/Gray	* When the projector cannot decode the return from the AMC unit, this
	icon also appears.

46

Image 46

Sanyo Projector owner manual Indication of the lamp status, Indication of the filter status, Status

Contents

Wired Setting Projector Set-up and Operation Network Set-up and Operation Compliance Federal Communications Commission Notice Safety instructions Table of contents Chapter Features Internet Intranet Network specifications of the projector Required operating environment for computers Use of this manual Expression/AbbreviationTrademarks Connect the LAN and set the configuration Flow of installationNetwork Configuration has completed Preparation Setup Procedures Connecting to the LAN line Description Numerical value is a setting example Network PIN code 255.255.0.0 169.254.100.100255.255.255.255 Setup Procedures Chapter Basic Setting and Operation Login Login the setting page of the projectorEnter the IP address Sub menu tab Switches the sub menu tab Main menu Display of main settingMain setting page in the display Setting How to use the setting Example of the setting Select an item by selecting a radio button Select items by ticking on check boxes Initial setting To 32 alphanumeric characters can be used for the password Network PIN code settingPJLink and password setting Whats PJLink? Network configuration Sets Dhcp configuration ON/OFF Mail setting Registering and deleting E-mail addresses Setting Smtp server and administrator addressSetting Smtp authentication Check / Delete Setting POP server Error message for sending alert mail Examples Type and contents of alert mail PJ information Snmp settingEnter community name to send Trap. Default name is public Enter user name of the projector etc. optional Trap check/delete Up to 99,999 hours can be set for the time settingClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Displays the status of the projectors power. Refer to next Power control and status checkService in need PJ status About projector condition Status Description Control Input System Meet the input signal are listedItem Description Image adjustment Image mode Video Computer PC adjustment Setting up the projector Screen setting Input source Lens adjustmentScreen mode Video Normal Full Wide169 Zoom True Natural wide Custom Setting Mode no. User1 User5 from the pull Resets the settings of Picture in PictureStores the adjustment values. Select a Clear the adjustment values. Select Sets on or off the logo display on Default, OFFRemote control Shutter management...Sets the shutter management operation Settings, etc Sets the color of the contents. ColorTime, Network PIN code, Network setting Sets the digital processing Information InformationItems Description Network Indication of the filter status Indication of the lamp statusStatus Chapter Appendix Examples of connection Peer-To-Peer connection Gateway Router installed in the network To another network Control Use of telnetUse the IP address assigned to the projector C00 Power on C01 Power off C05 Input C06 C07 C08 Password 1234 is used for the exampleCommand Function Menu display on Active Script/JavaScript enable Web browser settingProxy setting Windows XP Professional Examples OS/BrowsersInternet Explorer Proxy setting JavaScript Setting Netscape Navigator MAC OS X v Safari Why doesn’t the setting page appear in my web browser? How can I restrict access from the computer How can I install several projectors? Why am I not receiving E-mail alert messages? Operation What is the MAC address assigned to the projector? What are the rules for IP address assignment? Can I update the firmware of the projector SO-KL8A