Setup card operations
The operations for saving setting data on the setup card and loading the saved data from the card are performed on the CAM CARD READ/WRITE screen of CAM MAIN MENU 3.
Formatting the setup card
1 Perform the menu operations (pages 70 to 72), and display the “CAM CARD READ/WRITE” screen.
n< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
READ USER DATA
TITLE :
4 To proceed with the formatting of the setup card, turn the JOG dial button to move the arrow (cursor) to YES, and press the JOG dial button. When the formatting of the card is completed, the following message appears.
<Note>
When the card is formatted, the settings statuses applying at the time are also saved in the memory.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
CONFIG OK
2 Turn the JOG dial button to move the arrow (cursor) to the CARD CONFIG item.
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
nCARD CONFIG READ USER DATA
TITLE :
3 When the JOG dial button is pressed, the following message appears on the screen.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
CONFIG ?
YES
n
NO 
If one of the following messages appears when the JOG dial button is pressed, the card will not be formatted.
Error message | Remedial action |
|
|
CONFIG NG | Insert the card. |
NO CARD |
|
(setup card has not been |
|
inserted) |
|
|
|
CONFIG NG | The card may be defective. |
ERROR | Replace it. |
(the card cannot be formatted) |
|
|
|
5 Press the MENU button to exit the menu operations.
The setting menu is cleared, and the display showing the unit’s current statuses appears at the top and bottom of the viewfinder screen.
60
