Setting menu screens (CAM MAIN MENU 3)
GENLOCK/IRIS screen
The genlock and iris control settings are performed on this screen.
Item | Variable | VF | Remarks | |
range | display | |||
|
| |||
|
|
|
| |
H PHASE | 0 | USER | For coarsely adjusting the | |
COARSE | : | ENG | H phase during genlock. | |
| 7 |
|
| |
| : |
|
| |
| 15 |
|
| |
|
|
|
| |
H PHASE FINE | 0 | USER | For finely adjusting the H | |
| : | ENG | phase during genlock. | |
| 32 |
|
| |
| : |
|
| |
| 64 |
|
| |
|
|
|
| |
A. IRIS LEVEL | 0 | USER | For setting the auto iris | |
| : | ENG | target level. | |
| 82 |
| The brightness (iris) is | |
| : |
| controlled using this value. | |
| 100 |
| The higher the value | |
|
|
| selected, the higher the | |
|
|
| brightness. | |
|
|
|
| |
A. IRIS | 0 | USER | For setting the ratio | |
PEAK/AVE | : | ENG | between the auto iris peak | |
| 16 |
| and average value. | |
| : |
| The closer the setting is to | |
| 100 |
| 0, the greater the | |
|
|
| tendency toward average | |
|
|
| control; conversely, the | |
|
|
| closer the setting is to | |
|
|
| 100, the greater the | |
|
|
| tendency toward peak | |
|
|
| control. | |
|
|
|
| |
A. IRIS MODE | NORM1 | USER | For selecting the auto iris | |
| NORM2 | ENG | mode. | |
| CENTR |
| NORM1: | |
|
|
| The light is measured for | |
|
|
| the entire screen (except | |
|
|
| for the edges). | |
|
|
| NORM2: | |
|
|
| The light is measured for | |
|
|
| the entire screen (except | |
|
|
| for the top part). | |
|
|
| CENTR: | |
|
|
| The light is measured in | |
|
|
| the center area of the | |
|
|
| screen only. | |
|
|
|
| |
S. IRIS LEVEL | 0 | USER | For setting the super iris | |
| : | ENG | target level. | |
| 100 |
| (Backlight compensation | |
|
|
| mode) | |
|
|
|
|
LENS ADJ screen
The lens adjustments are performed on this screen.
Item | Variable | VF | Remarks | |
range | display | |||
|
| |||
|
|
|
| |
F2.8 ADJ | ON | ENG | For outputting the voltage | |
| OFF |
| output only when ON is | |
|
|
| selected as this item’s | |
|
|
| setting. | |
|
|
|
| |
F16 ADJ | ON | ENG | For outputting the voltage | |
| OFF |
| output only when ON is | |
|
|
| selected as this item’s | |
|
|
| setting. | |
|
|
|
|
<Note>
When using a lens which enables the open limit and close limit of the lens aperture to be adjusted, set “F2.8ADJ” or “F16ADJ” to ON, and repeatedly adjust so that the lens aperture will be set to “F2.8” or “F16.”
(This adjustment need not be performed if the lens does not have this adjustment function.)
The underlining in the variable range column indicates the setting in the preset mode.
89
