Setup card operations
Saving the data settings on the card
1 Perform the menu operations (pages 70 to 72), and display the “CAM CARD READ/WRITE” screen.
n< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
READ USER DATA
TITLE :
Give a title to the selected file.
4 Turn the JOG dial button to move the arrow (cursor) to the TITLE item.
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
READ USER DATA
m
TITLE :
Select the file No.
2 Turn the JOG dial button to move the arrow (cursor) to the SELECT item which comes after WRITE, and press the JOG dial button.
< CAM CARD READ/WRITE >
SELECT :1
READ
n SELECT 
:1 
WRITE CARD CONFIG READ USER DATA
TITLE :
5 When the JOG dial button is pressed, the arrow (cursor) starts flashing, and the input mode is established.
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
READ USER DATA
m 
TITLE :
3 Turn the JOG dial button to select a number from 1 to 8, and press the JOG dial button.
6 Turn the JOG dial button until the character to be set appears. When the button is turned, the character displayed is switched in the following sequence:
Space: ) 7
letters:
numbers:
symbols: ’, >, <, /, –
7 Press the JOG dial button to enter the character.
8 Turn the JOG dial button to move the arrow (cursor) to the next position (right), and repeat steps 5 to 7 to set the characters (maximum of 8).
61
