Menu operations
The setting menu operations are performed using the MENU button and JOG dial button. The menu configuration is divided into the camera unit’s setting menus and VTR unit’s setting menus.
It is possible to select the engineer menu which enables all the setting menu items to be set or, alternatively, the user menu which consists of individually tailored menus so that only those menus which will be used most frequently can be set.
User menu
The user menu was set when the unit was shipped. However, the user can change the configuration of the menus by selecting only those menus which will be used most frequently so that they will be tailored to the user’s individual needs.
Set the user menu on the USER MENU SELECT screen of the engineer menu. The data settings are saved in the
Display method
O When the MENU button is pressed, the camera unit’s USER menu screen which was set at the time of shipment is displayed.
O When the MENU button is pressed again, the VTR unit’s USER menu screen is displayed.
O When the MENU button is pressed once more, the menu screen display is cleared.
When the power is switched on
Status display
1A B 0dB | C Z73 | ||
|
|
|
|
Press the MENU button.
¢¢¢¢ CAM USER MENU ¢¢¢¢
Camera unit’s user menu
Press the MENU button.
¢¢¢¢ VTR USER MENU ¢¢¢¢
VTR unit’s user menu
Press the MENU button.
MENU switch
JOG dial button
Engineer menu
All the setting menu items can be set on this menu. The data settings are saved in the
Display method
O Hold down the MENU button for at least 3 seconds. O When the MENU button is pressed again, the VTR
unit’s MAIN MENU screen is displayed.
O When the MENU button is pressed once more, the menu screen display is cleared.
<Note>
The engineer menu is displayed at all times when the
70
